Reduce the pressure under your surface cleaner with the turn of a knob.
Kit includes:
Metering valve
2 – 1/4″ hose barbs, one with a lock nut
5′ – 1/4″ polybraid tubing
2 – Hose clamps
Gauge
1/4″ M X F X M tee
1/4″ swivel adapter
CPR-010 Fits Ultra Clean, Classic, Ground Force, Maxima, Mondo, Mini Mondo, BE, Hammerhead
Installation Instructions:
Remove the hose from the gun.
Install the 1/4" swivel adapter in the gun.
The gauge goes in the side port of the T, the brass valve goes on the male end of the T at a 90° angle to the gauge.
Install the surface cleaner hose in the bottom port of the brass valve, and the hose barb in the top port.
Attach the male threads of the T to the swivel adapter and tighten.
Drill a hole in the top of your deck just big enough to cram the hose barb through. When you drill, avoid the ribs underneath.
Install the brass nut on the hose barb from underneath.
Attach tubing and clamps to the hose barbs.
